4 Roller Laminator
Four roller laminators are designed for encapsulating documents, posters, etc.
The newly designed ValueLam 4500 HC-4 is the ideal value-priced Laminating/Mounting Machine for large-format imaging output up to 44" wide. Throughput performance is improved over that of the original ValueLam 4500 HC by way of an additional set of pull rollers and forced air cooling fans for faster throughput.
The ValueLam 4500 HC-4 laminator also features hot and cold lamination with dual heated rollers, release liner take up, 1/2" mounting capability and extra take up mandrel for automatic roll up of laminated prints. The ValueLam 4500 HC-4 runs all types of both cold and heat-set pressure sensitive laminates and adhesives and encapsulating with the true thermal laminates. Also featuring a "heat assist" mode (top roller heat only), the ValueLam 4500HC-4 laminator delivers the perfect heat level to increase initial adhesion and clarity of slow curing pressure sensitive films lessening the time to receive finished output suitable for display. The ValueLam 4500HC-4 is made in the USA.
Features and Function
- Additional set of pull rollers
- Forced air cooling fans for faster throughput
- Independently controlled top and bottom heat
- Electronic heat control with LED readout
- Variable speed
- Forward/reverse switch
- 3" (7.62cm) diameter silicone heated rollers
- Clear polycarbonate safety shield
- Emergency stops on both sides
- Mounting capability up to 1/2" (12.7mm)
- Shrouded foot switch
- Disable for foot switch
- Take up mandrel for release liners on P/S film
- Additional take up mandrel for rolling up laminated prints
Technical Specifications
| Plastic Width Capacity:
|
45"(114.3cm)
|
| Speed: |
0-10' per/minute (3m/min.) |
| Laminating Rollers: |
3" (7.62cm) diameter-heated |
| Film Supply Core Size : |
3" (7.62cm) |
| Maximum Film Roll Diameter: |
8" (14cm) |
| Machine Dimensions: |
56"L x 21"H x 30"D (142 x 53 x 76cm) |
| Net Weight: |
236 lbs. (95kg) |
| Shipping Weight: |
474 lbs. (170kg) |
| Heater Wattage: |
2160 watts |
| Power Requirements: |
20 amps, 120 VAC, 60Hz |
The Value-Lam 4500HC-4 is also available in 220 volt.
NOTE: this laminator ships by truck.
Your cart is empty
